Xtreme XR1347-C
Financing Available
Share this:

XR1347-C

  • 13,000 lbs Capacity
  • 47 ft Max Lift Height
  • 31 ft 6 in Forward Reach
  • 120 hp (Tier 4F)

 Product Specification Sheet

Add to List

    Need More Information?

    Description

    • 360° operator visibility
    • Ductile steel manifold
    • Suspension seat
    • Easy cab mounted grab handles
    • Easy service access
    • Master disconnect switch
    • Protected tilt & extend cylinders
    • Boom lift point
    • Steel hydraulic & fuel tanks
    • Manual lowering valve (cylinders)
    • Long life Lexan labels
    • Large cross section boom
    • Heavy duty boom chains
    • Easy tie downs
    • Suspended pedals
    • ˝Y˝ frame handle
    • Large capacity fuel tank
    • Heavy duty pre-cleaner
    • Trunnion mounted sway cylinders
    • Additional high pressure hydraulic filter
    • Melonite pins
    • Individual gauges/switches
    • Standard auxiliary hydraulics
    • Steel hood
    • Steel dash
    • Solid steel plate chassis
    • Center mounted powertrain
    • Rear axle stabilization (RAS)
    • Long life boom rollers
    • No outriggers
    • Dual batteries
    • Back up alarm with light
    • Cab step
    • Electrical aux hydraulic control

    Additional information

    Lift height

    47 ft
    Forward reach

    31 ft 6 in
    Frame leveling L/R

    11 degrees
    Machine weight

    35,200 lbs
    Engine

    Cummins 3.8L 120 hp (Tier 4F)
    Axles

    Dana 213
    Transmission

    Dana T20000
    Fuel Capacity

    50 gal
    Tires

    Foam Filled 15.5 x 25
    Hydraulic flow (per minute)

    49 gal
    Hydraulic pressure

    3,500 psi
    Hydraulic oil capacity

    62 gal
    Length to fork face

    21 ft 3 in
    Width

    101 in
    Height

    8 ft 1 in
    Wheelbase

    125 in
    Ground Clearance

    16.5 in
    Turning radius

    12 ft

    Options

    Cab Options

    • Open cab
    • Enclosed cab w/heat
    • Enclosed cab w/heat & AC

    Options

    • Pintle hook
    • Flashing amber strobe
    • Boom work lights – LED
    • Rear cab work light – LED
    • Tail, turn, running & brake lights
    • Fuel cap – locking
    • Enclosed cab clear glass
    • Machine lift points (qty 4)
    • Steel fenders (qty 4)
    • Boom maintenance stand
    • Limited slip axle (front) Dana 213
    • Special paint (excluding cab)
    • Special paint (including cab)
    • Flashing green strobe
    • Back up camera
    • Top curve cab glass
    • Battery blanket
    • Hydraulic tank heater
    • Cab heater (aux)
    • Cold weather synthetic oil
    • Swivel hook
    • Breather heater-high idle
    • Cable reel
    • Custom decal set up
    • Coordinated motion

    Carriages

    • Carriage 48″ fixed
    • Carriage 60″ fixed
    • Carriage 72″ fixed
    • Carriage 72″ fork positioning
    • Carriage 96″ fixed
    • Carriage 96″ fixed positioning

    Fork Tines

    • 6″ x 2.5″ x 48″ fork (qty 2)
    • 6″ x 2.5″ x 60″ (qty 2)
    • 6″ x 2.5″ x 72″ (qty 2)
    • 6″ x 2.5″ x 96″ (qty 2)
    • 7″ x 3″ x 60″ (qty 2)
    • 7″ x 3″ x 72″ (qty 2)
    • 7″ x 3″ x 96″ (qty 2)

    Tires

    • 14.00 x 24 solid RH (qty 2)
    • 14.00 x 24 solid LH (qty 2)
    • 15.5 x 28 E3 foam fill (qty 4)
    • 15.5 x 28 G2 RH foam fill (qty 2)
    • 15.5 x 28 G2 LH foam fill (qty 2)

    Attachments

    • Pole grapple 72″ with shoe
    • Pole grapple 96″ with shoe
    • Sling mount
    • Truss boom 12′ (Star)
    • Truss boom 15′ (Star)
    • Bucket 1.0 cu yd (Star)
    • Bucket 1.65 cu yd (Star)
    • 4’x4′ Personnel platform (Star)
    • 4’x6′ Personnel platform (Star)
    • 4’x8′ Personnel platform (Star)
    • 4’x9.67′ Personnel platform (Star)

    Load Chart

    Xtreme XR1347-C Load Chart

    Products are subject to modifications without prior notice. Images throughout the spec sheet may refer to non-standard machines or non-available configurations depending on models.