Financing Available
Share this:

XR1055-B

  • 10,000 lbs Capacity
  • 55 ft Lift Height
  • 39 ft Forward Reach
  • 74 hp HT (Tier 4F) Engine

Product Specification Sheet

    Need More Information?

    Description

    The ideal balance of reach, height, capacity, and maneuverability.

    • 360° operator visibility
    • Ductile steel manifold
    • Suspension seat
    • Easy cab mounted grab handles
    • Easy service access
    • Master disconnect switch
    • Protected tilt & extend cylinders
    • Boom lift point
    • Steel hydraulic & fuel tanks
    • Manual lowering valve (cylinders)
    • Long life Lexan labels
    • Large cross section boom
    • Heavy duty boom chains
    • Easy tie downs
    • Suspended pedals
    • Heavy duty pre-cleaner
    • Large capacity fuel tank
    • Additional high pressure hydraulic filter
    • Trunnion mounted sway cylinders
    • Steel hood
    • Melonite pins
    • Solid steel plate chassis
    • Standard auxiliary hydraulics
    • Rear axle stabilization (RAS)
    • Steel dash
    • Wider outrigger stance
    • Center mounted powertrain
    • Back up alarm with light
    • Long life boom rollers
    • Limited slip front axle
    • Dual batteries
    • Cab step
    • Electrical aux hydraulic control
    • Engine block heater

    Additional information

    Lift height

    55 ft

    Forward reach

    39 ft

    Frame leveling L/R

    11 degrees

    Machine weight

    34,600 lbs

    Engine

    Cummins 3.8L 74 hp HT (Tier 4F)

    Axles

    ZF MST3055 / 3060

    Transmission

    ZF 3WG94

    Fuel Capacity

    50 gal

    Tires

    Foam Filled 15.5 x 25

    Hydraulic flow (per minute)

    49 gal

    Hydraulic pressure

    3,500 psi

    Hydraulic oil capacity

    62 gal

    Length to fork face

    21 ft 4 in

    Width

    101 in

    Height

    8 ft 9 in

    Wheelbase

    125 in

    Ground Clearance

    16.5 in

    Turning radius

    12 ft

    Options

    Cab Options

    • Open cab
    • Enclosed cab w/heat
    • Enclosed cab w/heat & AC
    • 120hp engine surcharge

    Options

    • Pintle hook
    • Flashing amber strobe
    • Boom work lights – LED
    • Rear cab work lights – LED
    • Tail, turn, running, brake lights
    • Fuel cap – locking
    • Enclosed cab clear glass
    • Machine lift points (qty 4)
    • Swivel hook
    • Steel fenders (qty 4)
    • Boom maintenance stand
    • Cable reel
    • Special paint (excluding cab)
    • Special paint (including cab)
    • Flashing green strobe
    • Back up camera
    • Top curved cab glass
    • Battery blanket
    • Hydraulic tank heater
    • Cab heater (aux)
    • Cold weather synthetic oil
    • Breather heater-high idle
    • Custom decal set up
    • Coordinated motion

    Carriages

    • Carriage 48″ fixed
    • Carriage 48″ fork positioning
    • Carriage 48″ side tilt – 8,000 lbs
    • Carriage 52″ swing – 8,000 lbs
    • Carriage 60″ fixed
    • Carriage 60″ fork positioning
    • Carriage 72″ fixed
    • Carriage 72″ fork positioning
    • Carriage 72″ side tilt – 8,000 lbs
    • Carriage 72″ side tilt – 12,000 lbs
    • Carriage 72″ swing – 12,000 lbs
    • Carriage 72” – Rake
    • Carriage 96″ fixed

    Fork Tines

    • 4″ x 2.25″ x 48″ (quantity 2)
    • 4″ x 2.25″ x 60″ (quantity 2)
    • 5″ x 2.25″ x 48″ (quantity 2)
    • 5″ x 2.25″ x 60″ (quantity 2)
    • 6″ x 2″ x 72″ (quantity 2)
    • 6″ x 2″ x 96″ (quantity 2)
    • 7″ x 1.75″ x 48″ (quantity 2)
    • 7″ x 1.75″ x 60″ (quantity 2)
    • 7″ x 2.25″ x 60″ (quantity 2)
    • 6″ x 2.25″ x 60″ (quantity 2)
    • 6″ x 2″ x 48″ full taper (quantity 2)
    • 2″ x 2″ x 48″ block (quantity 2)
    • 2″ x 3″ x 48″ block (quantity 2)

    Tires

    • 14.00 x 24 solid RH (quantity 2)
    • 14.00 x 24 Solid LH (quantity 2)
    • 15.5 x 25 E3 foam fill (quantity 4)
    • 15.5 x 25 G2 RH foam fill (quantity 2)
    • 15.5 x 25 G2 LH foam fill (quantity 2)

    Xtreme OnSite™ Telematics

    • Data & API1 only (24 months)
    • Data & API1 only (60 months)
    • OnSite™ data & dashboard (24 months)
    • OnSite™ data & dashboard (60 months)
    • Access keypad

    Attachments

    • Pole grapple 72″ with shoe (CR)
    • Sling mount
    • Truss boom 12′ (Star)
    • Truss boom 15′ (Star)
    • Bucket 1.0 cu yd (Star)
    • Bucket 1.65 cu yd (Star)
    • 4’x4′ Personnel platform (Star)
    • 4’x6′ Personnel platform (Star)
    • 4’x8′ Personnel platform  (Star)
    • 4’x9.67′ Personnel platform (Star)
    • Tire Manipulator
    • Rotobec
    • Skid Steer Adapter

    Load Chart

    Xtreme XR1055-B Load Chart

    Products are subject to modifications without prior notice. Images throughout the spec sheet may refer to non-standard machines or non-available configurations depending on models.