Description
This extra heavy Verti-Drain 7626 contains a heavier gearbox, PTO and rear roller. The machine is popular with contractors, racecourses and will be the best choice when soils are really hard.
Additional information
| Working width m | 2.6 m |
|---|---|
| Working width inch | 102 inch |
| Max working depth mm | 400 mm |
| Max working depth inch | 16 inch |
| Working speed at hole spacing 65 mm kmh | 0.75 km/h |
| Working speed at hole spacing 2-12 mph | 0.47 mph |
| Weight kg | 1930 kg |
| Weight lbs | 4254 lbs |
| Hole distance with 12 mm tines mm | 65 mm |
| Hole distance with 12 x 6 tines inches | 2.5 inch |
| Hole distance with 24 mm tines mm | 129 mm |
| Hole distance with 1 x 16 tines inches | 5 inch |
| Hole spacing driving distance direction mm | 50-195 mm |
| Hole spacing distance driving direction inches | 2 – 7-1/2 inch |
| Max diameter-solid tine mm | 24 x 400 mm |
| Max diameter-solid tine inches | 1 x 16 inch |
| Max diameter hollow tine mm | 32 x 300 mm |
| Max diameter hollow tine inches | 1-1/4 x 12 inch |
| Min tractor hp required | 65 HP |
| Min lifting capacity kg | 2300 kg |
| Min lifting capacity lbs | 5070 LBS |
| Max capacity with spacing 65 mm m2hr | 1950 m²/hr |
| Max capacity with spacing 2-12 ft2hr | 20989 ft²/hr |
| Three-pointhitch | 3-point CAT 2 |
| Rpm max | 500 rpm |
| Gear case oil | 80W90 – 6.5 |
| Lubricant | EP 2 |
| Dimensions mm | 2800 x 1100 x 1560 mm |
| Dimensions inch | 110 x 43.3 x 61.4 inch |
| Slip clutch setting | 1100 Nm |
Standard components
- Solid tines 18 x 400 mm (3/4 x 16″)
- Front and rear roller
- 3-speed gearbox
- Hydraulic adjustment of the operating depth
- PTO
- Toolbox with combi tool and manual