Financing Available
Share this:

Verti-Drain® 7521

Unit No: 7521

Aeration, Verti-Drain®

Product Specification Sheet

    Need More Information?

    Description

    The Verti-Drain 7521 is a heavy duty machine that is designed to aerate soils up to a full 400mm (16″) deep. With the 3-speed gearbox it will mix to any tractor.

    Additional information

    Working width m

    2.1 m

    Working width inch

    83 inch

    Max working depth mm

    400 mm

    Max working depth inch

    16 inch

    Working speed at hole spacing 65 mm kmh

    0.70 km/h

    Working speed at hole spacing 2-12 mph

    0.45 mph

    Weight kg

    1375 kg

    Weight lbs

    3025 lbs

    Hole distance with 12 mm tines mm

    65 mm

    Hole distance with 12 x 6 tines inches

    2.5 inch

    Hole distance with 24 mm tines mm

    129 mm

    Hole distance with 1 x 16 tines inches

    5 inch

    Hole spacing driving distance direction mm

    50-195 mm

    Hole spacing distance driving direction inches

    2 – 7-1/2 inch

    Max diameter-solid tine mm

    24 x 400 mm

    Max diameter-solid tine inches

    1 x 16 inch

    Max diameter hollow tine mm

    32 x 300 mm

    Max diameter hollow tine inches

    1-1/4 x 12 inch

    Min tractor hp required

    55 HP

    Min lifting capacity kg

    1650 kg

    Min lifting capacity lbs

    3600 LBS

    Max capacity with spacing 65 mm m2hr

    1470 m²/hr

    Max capacity with spacing 2-12 ft2hr

    13400 ft²/hr

    Three-pointhitch

    3-point CAT 2

    Rpm max

    500 rpm

    Gear case oil

    80W90 – 5.8

    Lubricant

    EP 2

    Dimensions mm

    2280 x 1000 x 1500 mm

    Dimensions inch

    91 x 40 x 60 inch

    Slip clutch setting

    800 Nm

    Standard components

    • Solid tines 18 x 300 mm (3/4 x 12″) with adapters
    • 3-speed gearbox
    • Front and rear roller
    • PTO
    • Toolbox with combi tool and manual

    Options

    • Hollow tines
    Products are subject to modifications without prior notice. Images throughout the spec sheet may refer to non-standard machines or non-available configurations depending on models.