Financing Available
Share this:

Verti-Drain® 7316

Unit No: 7316

Aeration, Verti-Drain®

Product Specification Sheet

    Need More Information?

    Description

    The Verti-Drain 7316 is a highly effective machine for use on sportsfields and all areas of the golf course.

    Additional information

    Working width m

    1.6 m

    Working width inch

    63 inch

    Max working depth mm

    300 mm

    Max working depth inch

    12 inch

    Working speed at hole spacing 65 mm kmh

    0.85 km/h

    Working speed at hole spacing 2-12 mph

    0.55 mph

    Weight kg

    670 kg

    Weight lbs

    1480 lbs

    Hole distance with 12 mm tines mm

    65 mm

    Hole distance with 12 x 6 tines inches

    2.5 inch

    Hole distance with 18 mm tines mm

    130 mm

    Hole distance with 34 x 9 tines inches

    5 inch

    Hole spacing driving distance direction mm

    25 – 195 mm

    Hole spacing distance driving direction inches

    1 – 7-1/2 inch

    Max diameter-solid tine mm

    18 x 300 mm

    Max diameter-solid tine inches

    3/4 x 12 inch

    Max diameter hollow tine mm

    25 x 250 mm

    Max diameter hollow tine inches

    1 x 10 inch

    Min tractor hp required

    28 HP

    Min lifting capacity kg

    825 kg

    Min lifting capacity lbs

    1815 LBS

    Max capacity with spacing 65 mm m2hr

    1360 m²/hr

    Max capacity with spacing 2-12 ft2hr

    12300 ft²/hr

    Three-pointhitch

    3-point CAT 1

    Rpm max

    500 rpm

    Gear case oil

    80W90 – 5

    Lubricant

    EP 2

    Dimensions mm

    1700 x 800 x 1200 mm

    Dimensions inch

    68 x 32 x 48 inch

    Slip clutch setting

    500 Nm

    Standard components

    • Solid tines 12 x 300 mm (1/2 x 12″)
    • 3-speed gearbox
    • Front and rear roller
    • Toolbox with combi tool and manual

    Options

    • Hollow tines
    Products are subject to modifications without prior notice. Images throughout the spec sheet may refer to non-standard machines or non-available configurations depending on models.