Description
The Verti-Drain 7212 are well suited to lower hp tractors where acces is restricted or a lighter footprint is required.
Additional information
| Working width m | 1.2 m |
|---|---|
| Working width inch | 48 inch |
| Max working depth mm | 250 mm |
| Max working depth inch | 10 inch |
| Working speed at hole spacing 65 mm kmh | 1.00 km/h |
| Working speed at hole spacing 2-12 mph | 0.6 mph |
| Weight kg | 470 kg |
| Weight lbs | 1030 lbs |
| Hole distance with 12 mm tines mm | 65 mm |
| Hole distance with 12 x 6 tines inches | 2.5 inch |
| Hole distance with 18 mm tines mm | 100 mm |
| Hole distance with 34 x 9 tines inches | 4 inch |
| Hole spacing driving distance direction mm | 25 – 165 mm |
| Hole spacing distance driving direction inches | 1 – 6-1/2 inch |
| Max diameter-solid tine mm | 18 x 250 mm |
| Max diameter-solid tine inches | 3/4 x 10 inch |
| Max diameter hollow tine mm | 25 x 250 mm |
| Max diameter hollow tine inches | 1 x 10 inch |
| Min tractor hp required | 18 HP |
| Min lifting capacity kg | 570 kg |
| Min lifting capacity lbs | 1250 LBS |
| Max capacity with spacing 65 mm m2hr | 1200 m²/hr |
| Max capacity with spacing 2-12 ft2hr | 11000 ft²/hr |
| Three-pointhitch | 3-point CAT 1 |
| Rpm max | 500 rpm |
| Gear case oil | 80W90 |
| Lubricant | EP 2 |
| Dimensions mm | 1350 x 800 x 1100 mm |
| Dimensions inch | 54 x 32 x 44 inch |
| Slip clutch setting | 400 Nm |
Standard components
- Solid tines 12 x 250 mm (1/2 x 10″)
- 3-speed gearbox
- Front and rear roller
- Toolbox with combi tool and manual