Description
The Verti-Drain 7117 is one of the High Speed series. The machine works to a depth of 15cm. The Verti-Drain 7117 is powered by a tractor PTO.
Additional information
| Working width m | 1.7 m |
|---|---|
| Working width inch | 68 inch |
| Max working depth mm | 150 mm |
| Max working depth inch | 6 inch |
| Working speed at hole spacing 65 mm kmh | 2.0 km/h |
| Working speed at hole spacing 2-12 mph | 1.25 mph |
| Weight kg | 575 kg |
| Weight lbs | 1265 lbs |
| Hole distance with 12 mm tines mm | 55 mm |
| Hole distance with 12 x 6 tines inches | 2-1/8 inch |
| Hole spacing driving distance direction mm | 25 – 125 mm |
| Hole spacing distance driving direction inches | 1 – 5 inch |
| Max diameter-solid tine mm | 12 x 150 mm |
| Max diameter-solid tine inches | 1/2 x 6 inch |
| Max diameter hollow tine mm | 19 x 150 mm |
| Max diameter hollow tine inches | 3/4 x 6 inch |
| Min tractor hp required | 28 HP |
| Min lifting capacity kg | 700 kg |
| Min lifting capacity lbs | 1550 LBS |
| Max capacity with spacing 65 mm m2hr | 3300 m²/hr |
| Max capacity with spacing 2-12 ft2hr | 29500 ft²/hr |
| Three-pointhitch | 3-point CAT 1 |
| Rpm max | 500 rpm |
| Gear case oil | 80W90 – 3 |
| Lubricant | EP 2 |
| Dimensions mm | 1900 x 750 x 1050 mm |
| Dimensions inch | 76 x 30 x 42 inch |
| Slip clutch setting | 400 Nm |
Standard components
- Solid tines 12 x 150 mm (1/2″ x 6″) with accompanying tine holders.
- Front and rear roller scrapers
- 3-speed gearbox
- Toolbox with combi tool and manual