Description
With a working width of 1.90 mtr (76”), and up to 8750 m2 per hr, (94,000 ft² p/hr), Max working depth of 25 cm (10”), the All New Verti-Drain 2519 is one of the most productive deep tines on the martket.
Additional information
| Working width m | 1.95 m |
|---|---|
| Working width inch | 76.7 inch |
| Max working depth mm | 250 mm |
| Max working depth inch | 10 inch |
| Working speed at hole spacing 65 mm kmh | 1.75 km/h |
| Working speed at hole spacing 2-12 mph | 1.08 mph |
| Weight kg | 850 kg |
| Weight lbs | 1874 lbs |
| Max diameter-solid tine mm | 18 x 250 mm |
| Max diameter-solid tine inches | 3/4 x 10 inch |
| Max diameter hollow tine mm | 25 x 250 mm |
| Max diameter hollow tine inches | 1 x 10 inch |
| Min tractor hp required | 60 HP |
| Min lifting capacity kg | 850 kg |
| Min lifting capacity lbs | 1874 LBS |
| Max capacity with spacing 65 mm m2hr | 3443 m²/hr |
| Max capacity with spacing 2-12 ft2hr | 37055 ft²/hr |
| Three-pointhitch | 3-point CAT 1-2 |
| Rpm max | 540 rpm |
| Gear case oil | 80W90 – 1.2 |
| Dimensions mm | 1240 x 2376 x 955 mm |
| Dimensions inch | 49 x 93.5 x 37.6 inch |
| Slip clutch setting | 800 Nm |
Standard components
- Solid tines 18 x 250 mm (1/2 x 10)
- PTO
- Toolbox with combi tool and manual