Description
The Verti-Drain 2220 is able to work at a high speed in hard soils and can take solid tines with a diameter up to 24mm (1″).
Additional information
| Working width m | 2.08 m |
|---|---|
| Working width inch | 82 inch |
| Max working depth mm | 225 mm |
| Max working depth inch | 9 inch |
| Working speed at hole spacing 65 mm kmh | 1.79 km/h |
| Working speed at hole spacing 2-12 mph | 1.1 mph |
| Weight kg | 1030 kg |
| Weight lbs | 2270 lbs |
| Hole distance with 12 mm tines mm | 65 mm |
| Hole distance with 12 x 6 tines inches | 2.5 inch |
| Hole distance with 18 mm tines mm | 130 mm |
| Hole distance with 34 x 9 tines inches | 4 inch |
| Hole spacing driving distance direction mm | 25 – 195 mm |
| Hole spacing distance driving direction inches | 1 – 7.5 inch |
| Max diameter-solid tine mm | 24 x 225 mm |
| Max diameter-solid tine inches | 1 x 9 inch |
| Max diameter hollow tine mm | 25 x 225 mm |
| Max diameter hollow tine inches | 1 x 9 inch |
| Min tractor hp required | 50 HP |
| Min lifting capacity kg | 1300 kg |
| Min lifting capacity lbs | 2866 LBS |
| Max capacity with spacing 65 mm m2hr | 3728 m²/hr |
| Max capacity with spacing 2-12 ft2hr | 40128 ft²/hr |
| Three-pointhitch | 3-point CAT 1-2 |
| Rpm max | 540 rpm |
| Gear case oil | 80W90 |
| Lubricant | EP 2 |
| Dimensions mm | 1210 x 2220 x 900 mm |
| Dimensions inch | 47.6 x 87.4 x 35.4 inch |
Standard components
- Solid tines 18 x 225 mm (3/4 x 9)
- Adaptors 24 to 18 mm
- Rear roller
- PTO
- Toolbox with combi tool and manual