Financing Available
Share this:

Farmall® 140A

  • Gross Horsepower: 140
  • PTO Horsepower​: 115
  • Operator Area: ROPS or Cab
  • Traction: 2WD or MFD
  • Transmission: 8×8 Power Shuttle 8X8 Mechanical Shuttle or 16X8 Power Shuttle with Hi-Lo
  • Emissions Compliance: Tier 4 B/Final

Product Specification Sheet

Description

The versatile Farmall 140A features a factory-installed loader-ready option to get you on your way faster. The 140 HP engine and 115 PTO HP will power you through any task.

Additional information

Power

Case IH FPT Tier 4 B/Final with Selective Catalytic Reduction (SCR)

Engine HP at 2,200 RPM

140

PTO HP at Rated 540 Std./1,000 Opt. RPM

115

Cylinders/Valves/Displacement

4/16/274 cu. in. (4.5 L)

Aspiration, Turbocharged or Naturally Aspirated

Turbocharged & aftercooled

Battery, Volts/Alternator, Amps

12 volt /120 amps

Transmission Type (Standard/Optional)

8F×8R with power shuttle/8F×8R with mechanical shuttle or 16F×8R with power shuttle and hi-lo

Creeper Speeds @ Rated Engine RPM

See ground speeds chart in PDF specification

Rear Axles (Standard/Optional)

Flange/Bar

Rear Bar Axle Diameter

3.071 in. (78 mm)

Front Axle (Standard /Optional)

2WD/Class 3 non-suspended standard-duty

Tread Adjustability

64.0 in.–80.0 in. (1 626–2 032 mm)

Wheelbase (2WD /MFD)

95.7 (2 432)/104 (2 640)

Hydraulics System

Open center system, closed center load sensing (CCLS) remotes

Main Hydraulic Pump Type

Fixed displacement

Implement Flow Capacity

22 GPM (83 L/min.)

Remote Valves

2 std; 3 or 4 opt

3-Point Hitch Features

Category II, draft sensing, adjustable

3-Point Hitch Lift Capacity @ 24 in. Behind Pin

7,200 lbs. (3 266 kg)

Fuel Tank Capacity

56.8 U.S. gal. (215 L)

Engine Oil with Filter

10.6 quart (10 L)

Hydraulic Fluid–2WD/4WD

63.4 quart (60 L)/71.8 quart (68 L)

Diesel Exhaust Fluid (DEF) Tank Capacity

7.9 U.S. gal. (30 L)

Height to Top of Cab/ROPS Raised

110 in. (2 800 mm)/117.3 (2 980 mm)

Overall Width, with Standard Wheels/Tires

74.5 in. (1 893 mm) at fenders; 98 in. (2 490 mm) bar axle ends

Weight - 2WD w/ROPS

8,686 lbs. (3 940 kg)

Weight - MFD/4WD w/ROPS

9,965 lbs. (4 520 kg)

Weight - 2WD w/Cab

9,414 lbs. (4 270 kg)

Weight - MFD/4WD w/Cab

10,648 lbs. (4 830 kg)

Front Tire, 2WD

10.00–16, 8 ply, F2

Front Tire, MFD

14.9×24, 6 ply, R1

Rear Tire

18.4×34, 8 ply, R1

Products are subject to modifications without prior notice. Images throughout the spec sheet may refer to non-standard machines or non-available configurations depending on models.