Description
The comfortable operating environment of the Farmall 130A coupled with its 130 HP and 105 PTO HP will get you through the long workday with less fatigue.
Farmall® 130A
- Gross Horsepower: 130
- PTO Horsepower: 105
- Operator Area: ROPS or Cab
- Traction: 2WD or MFD
- Transmission: 8×8 Power Shuttle 8X8 Mechanical Shuttle or 16X8 Power Shuttle with Hi-Lo
- Emissions Compliance: Tier 4B/Final
Additional information
| Power | Case IH FPT Tier 4 B/Final with Selective Catalytic Reduction (SCR) |
|---|---|
| Engine HP at 2,200 RPM | 130 |
| PTO HP at Rated 540 Std./1,000 Opt. RPM | 105 |
| Cylinders/Valves/Displacement | 4/16/274 cu. in. (4.5 L) |
| Aspiration, Turbocharged or Naturally Aspirated | Turbocharged & aftercooled |
| Battery, Volts/Alternator, Amps | 12 volt /120 amps |
| Transmission Type (Standard/Optional) | 8F×8R with power shuttle/8F×8R with mechanical shuttle or 16F×8R with power shuttle and hi-lo |
| Creeper Speeds @ Rated Engine RPM | See ground speeds chart in PDF specification |
| Rear Axles (Standard/Optional) | Flange/Bar |
| Rear Bar Axle Diameter | 3.071 in. (78 mm) |
| Front Axle (Standard /Optional) | 2WD/Class 3 non-suspended standard-duty |
| Tread Adjustability | 64.0 in.–80.0 in. (1 626–2 032 mm) |
| Wheelbase (2WD /MFD) | 95.7 (2 432)/104 (2 640) |
| Hydraulics System | Open center system, closed center load sensing (CCLS) remotes |
| Main Hydraulic Pump Type | Fixed displacement |
| Implement Flow Capacity | 22 GPM (83 L/min.) |
| Remote Valves | 2 std; 3 or 4 opt |
| 3-Point Hitch Features | Category II, draft sensing, adjustable |
| 3-Point Hitch Lift Capacity @ 24 in. Behind Pin | 7,200 lbs. (3 266 kg) |
| Fuel Tank Capacity | 56.8 U.S. gal. (215 L) |
| Engine Oil with Filter | 10.6 quart (10 L) |
| Hydraulic Fluid–2WD/4WD | 63.4 quart (60 L)/71.8 quart (68 L) |
| Diesel Exhaust Fluid (DEF) Tank Capacity | 7.9 U.S. gal. (30 L) |
| Height to Top of Cab/ROPS Raised | 110 in. (2 800 mm)/117.3 (2 980 mm) |
| Overall Width, with Standard Wheels/Tires | 74.5 in. (1 893 mm) at fenders; 98 in. (2 490 mm) bar axle ends |
| Weight - 2WD w/ROPS | 8,686 lbs. (3 940 kg) |
| Weight - MFD/4WD w/ROPS | 9,965 lbs. (4 520 kg) |
| Weight - 2WD w/Cab | 9,414 lbs. (4 270 kg) |
| Weight - MFD/4WD w/Cab | 10,648 lbs. (4 830 kg) |
| Front Tire, 2WD | 10.00–16, 8 ply, F2 |
| Front Tire, MFD | 14.9×24, 6 ply, R1 |
| Rear Tire | 18.4×34, 8 ply, R1 |
