Financing Available
Share this:


  • Operating Weight: 48,900 lb
  • Engine Power: 160 hp

Product Specification Sheet

    Need More Information?


    The CX210D’s new electronically controlled hydraulic pump and larger control and solenoid valves boost breakout force, increase lifting strength and improve responsiveness, enabling faster cycle times and the machine to work up to 9% faster. Your operators will get more done in less time. The CX210D excavator employs an SCR Tier 4 Final solution that provides up to 5% greater fuel efficiency while providing exceptional power.


    Achieve up to 9% faster cycle times and greater power thanks to an improved hydraulic system with a new electronically controlled hydraulic pump, a larger control valve and a new solenoid valves. Craning an uneven load? Activate the standard Free-Swing feature for improved control. Working at night? Opt for the new LED light package. To help tailor the machine to the operator and the application, a control pattern selector and power mode selector both come standard.

    Fuel Efficiency
    An SCR solution lets the engine run at peak performance to provide full throttle response throughout the work cycle while still meeting Tier 4 Final emissions regulations and providing up to 5% greater fuel efficiency. And without a Diesel Particulate Filter to replace, SCR is simple too. Simply add a little Diesel Exhaust Fluid during fill up and go.

    Comfort and Visibility
    The new and improved cab provides comfort like never before. There’s more entry room and foot space. The air-ride seat is larger to reduce pressure points, slides forward and back, tilts back up to 65°, has an adjustable lumbar system and a built-in heater. An innovative armrest design adjusts independently of the console while still ensuring joysticks are always comfortably within reach. Even the pedals can adjust ±22° to suit personal preference. There’s also a Bluetooth radio and climate control system that responds to sunlight. The 7″ widescreen color monitor provides a constant rear camera view for increased awareness.

    When you invest in CASE equipment, you need it to last. We make it easy. D Series excavators are no exception. A Standard oil sample ports allows for quick sampling of engine oil and hydraulic oil while grouped service points, tilt-out coolers and auto-locking side panels that stay open make it easy to perform routine maintenance. We even added new handrails to make it easier to get around the machine.

    Additional information


    Isuzu AR 4HK1X

    Engine Cylinders


    Displacement – in3 (L)

    317 (5.2)

    Net Horsepower – hp (kW)

    160 (119.3)

    Torque – lbf·ft (N·m)

    457 (620)

    Bucket Digging Force – lbf (kN)

    34,600 (154)

    Arm Digging Force – lbf (kN)

    25,100 (112)

    Operating Weight – lb (kg)

    48,900 (22 200)

    Drawbar Pull – lbf (kN)

    42,300 (188)

    Swing Speed – RPM


    Travel Speed – mph (kph)

    3.5 (5.6)

    Overall Height with Attachment

    9 ft 9 in (2 960 mm)

    Cab Height

    9 ft 10 in (2 990 mm)

    Overall Length with Attachment

    30 ft 11 in (9 430 mm)

    Overall Length without Attachment

    16 ft 5 in (5 000 mm)

    Width of Upper Structure

    9 ft 1 in (2 770 mm)

    Track Overall Length

    14 ft 8 in (4 470 mm)

    Track Overall Width

    10 ft 6 in (3 190 mm)

    Track Shoe Width

    2 ft 7 in (800 mm)

    Upper Structure Ground Clearance

    3 ft 5 in (1 050 mm)

    Minimum Ground Clearance

    1 ft 5 in (420 mm)

    Rear Tail Swing Radius

    9 ft 2 in (2 790 mm)

    Maximum Digging Depth

    21 ft 10 in (6 650 mm)

    Maximum Reach @ Ground Level

    31 ft 11 in (9 730 mm)

    Optional Equipment


    • Refueling pump
    • Air pre-cleaner – Cyclone
    • High ambient temperature cooling package


    • Auxiliary hydraulics:
      • Secondary low-flow/joystick activated
      • Proportional hydraulic controls
    • Hose Burst Check Valve – HBCV


    • Track guides – triple


    • FOPS cab top guard – Level 2
    • Front grill guard – 2 x 2 in (50.8 x 50.8 mm) screen mesh
    • Front rock guard – vertical bars
      • Two piece/OPG 1
    • Front rock guard – vertical bars
      • One piece/OPG 2
    • Vandal guard (front window) with common key
    • Rain deflector – not available with front guards
    • Sun visor
    • Side-view camera
    • LED Package: Includes 1 Side view camera and 6 LED Lights – 2 front cab mounted, 2 rear mounted and 1 mounted on each side
    Products are subject to modifications without prior notice. Images throughout the spec sheet may refer to non-standard machines or non-available configurations depending on models.