Financing Available
Share this:


  • Operating Weight: 16,405 lb
  • Engine Power: 68 hp

Product Specification Sheet


The best just got better. The CASE 650M has built upon the rock-solid performance of our popular 650L by adding the hallmarks of the M Series, and much more. Stronger drawbar pull. Maintenance-free Tier 4 Final emissions solution. An all-new undercarriage. Smarter controls, a more comfortable cab and greater visibility to the blade. It’s what you love, with more to love.


Strength and smarts combine to give the 650M greater performance from first cut to fine grading. A 74 horsepower engine delivers increased drawbar pull of 39,086 lbs. The hydrostatic drive system provides responsive control you can feel and a robust, box-style C-frame better supports heavy blade forces. Adjustable shuttle settings, combined with an advanced load management system that automatically adjusts track speed as load levels change, give you the pushing power you need at any speed. And beneath it all is a ruggedly redesigned undercarriage, available with three track configurations (including our exclusive 20-inch Wide Track), all of which come standard with clipped grousers for better turning.

Fuel Efficiency
The 650M features a maintenance-free, Tier 4 Final emissions solution that uses Diesel Oxidation Catalyst (DOC) technology. This delivers maximum horsepower and torque with no regeneration required, no after-treatment filters to replace and no new fluids to add.

Comfort and Visibility
Not only does the redesigned undercarriage help with performance, it also helps reduce noise and vibration within the cab. Improved seating, ergonomic joystick steering and other standard features such as environmental controls and a radio also help to keep operators comfortably in control. And thanks to smaller idlers, a sloped hood and a cab-forward M Series design, there’s excellent visibility all around the blade and ahead of the machine.

An improved undercarriage design with robust components, heavy-duty SALT tracks, and optional Max Life bushings help extend the life of your machine. And all daily service checkpoints – including hydraulic components, filters and electrical components – are accessible from the ground without the need for any tools.

Additional information



Displacement/Cylinders – in³ (L)

208 (3.4)/4

Net Horsepower @ 2000 RPM – hp (kW)

68 (50.6)

Emissions Certification Solutions

Tier 4 Final (DOC)

Operating Weight – lb (kg)

16,405 (7 441)

Blade Width – in. (mm)

109 (2 769)

Blade Capacity – yd3 (m3)

2 (1.48)

Maximum Drawbar Pull – lb. (kN)

39,086 (173.9)

Maximum Travel Speed – mph (kph)

5.0 (8)

Total Flow – gpm (L/min)

20.3 (78.8)

Height to Top of Cab

8 ft 8 in (2 648 mm)

Ground Clearance

1 ft 2 in (365 mm)

Blade Height

2 ft 10 in (853 mm)

Blade Lift Above Ground

2 ft 11 in (892 mm)

Blade Depth Below Ground

1 ft 9 in (533 mm)

Length of Track On Ground

7 ft 1 in (2 160 mm)

Length, Blade Straight with Ripper

16 ft 3 in (4 951 mm)

Width, Blade Straight

9 ft 1 in (2 769 mm)

Width, Over Track

7 ft 0 in (2 122 mm)

Optional Equipment

Operator Environment

  • Cab with heater, 22,700 BTU (6.65 kW)/hr air conditioner, defroster, front windshield washer and 2F-1R lights
  • 3 in (76 mm) seat belt
  • Deluxe air suspension seat


  • 4 spool hydraulic valve for field-installed ripper

Rear Mounted Equipment

  • Ripper, parallelogram 5 slots with 3 shanks


  • 90 in (2.29 m)
  • 96 in (2.44 m)
  • 109 in (2.77 m)
  • 120 in (3.05 m)


  • Brush guards (Sweeps)
  • Center rockguard


  • Rear ROPS and cab
  • Side ROPS
  • Radiator brush screen


  • Case Max-Life track
  • Cold start aid (Grid Heater)
  • Counterweight, front
  • Drawbar
  • Front pull hook
  • Lights – halogen, 2 front, 1 rear for cab or ROPS
  • Retrieval hitch
  • Special paint
  • Turbo precleaner
  • Winch drive PTO
  • Rear Wiper for cab
  • Lights without brush guard
  • Lights with brush guard
  • Diagnostics check fittings
  • Environmental drains
  • Lift/Tow decals (Export)
Products are subject to modifications without prior notice. Images throughout the spec sheet may refer to non-standard machines or non-available configurations depending on models.