Financing Available
Share this:

588H

  • Operating Weight: 16,978 lb
  • Engine Power: 74 hp

Product Specification Sheet

    Need More Information?

    Description

    With fast lifting speeds, roading speeds of up to 24 mph (38.6 km/h), lifting capacities of up to 8,000 lbs and a slew of unique features that keep loads level and operators comfortable, the high-performance, Tier 4 Final 588H forklift truly does raise the bar. Without a disruptive third mast, our wide-channel, dual-mast design gives it unmatched visibility. We’ve also maintained a low-profile hood with our Tier 4 Final engine for a clear view behind the machine. Even at top lift heights, a perforated steel canopy gives operators clear vision without the neck-straining need to lean forward.

    Features

    Productivity
    The CASE 586H and 588H increase productivity and efficiency with industry-leading lift speed and dependable, high-performing lift capacities. These rough terrain forklifts are able to operate in a variety of terrains with the optional 4 four-wheel drive and standard differential lock. No need to worry about your load, CASE offers maximum travel capabilities with their 60° of mast tilt and optional load control. If operating in tight areas is a concern, the 588H features a narrow zero-tail swing design, meaning if the rear tires clear it, the rear of the machine will as well. CASE rough terrain forklifts feature an industry standard ITA class 3 carriage and forks allowing a wide range of aftermarket attachments.

    Fuel Efficiency
    These forklifts feature a simple, cost-effective Tier 4 Final solution. The 74 horsepower, 3.4 liter FPT engine uses a Diesel Oxidation Catalyst (DOC) to deliver a minimum of 5% better fuel efficiency than our previous models and faster response times while meeting current environmental standards.

    Comfort and Visibility
    Without a disruptive third mast, our wide-channel, dual-mast design gives the H Series unmatched visibility. A narrow operating console further help increase front view so operators can confidently secure materials and a low-profile hood provides a clear view behind the machine. The large operating platform provides ample room for any operator. Add the optional deluxe suspension and load control for a comfortable ride on any terrain.

    Serviceability
    From tool-free swing-out access doors and spin-on filters, to ground-level site gauges and grouped service points, you can do daily maintenance in a matter of minutes. It’s the easiest way to help you get the most performance and longest life out of your machine. Axles are also easily serviced without complete disassembly for easy upkeep.

    Additional information

    Engine

    FPT F5HFL463D

    Displacement/Cylinders – in³ (L)

    207 (3.4) / 4

    Emissions Certification Solutions

    Tier 4 Final (DOC)

    Gross Horsepower @ 2200 RPM – hp (kW)

    74 (55)

    Net Horsepower @ 2200 RPM – hp (kW)

    68 (51)

    Peak Torque – lb ft (Nm)

    233 (316)

    Transmission

    4F-4R Power Shuttle Synchromesh

    Maximum Travel Speed Forward – mph (kph)

    24.0 (38.6)

    Lift Capacity at 15 ft. @ 24 in Center– lb (kg)

    6,000 (2 722)

    Lift Capacity at 22 ft. @ 24 in Center– lb (kg)

    4,000 (1 814)

    Operating Weight – lb (kg)

    16,978 (7 701)

    Overall Height to Top of ROPS

    8 ft 8 in (2 645 mm)

    Wheelbase – 4WD

    7 ft 1 in (2.15 m)

    Overall Length with 48 in Forks

    17 ft 2 in (5.23 m)

    Ground Clearance

    10.3 in (260 mm)

    Overall Height to Top of Mast (Mast Closed)

    10 ft 5 in (3.18 m)

    Overall Operating Height (Mast Raised to Full Height)

    25 ft 5 in (7.75 m)

    Maximum Fork Height (Forks Horizontal)

    22 ft 0 in (6 706 mm)

    Forward Mast Tilt

    45º

    Optional Equipment

    ENGINE

    • Cold Weather Starting Aid: Dual 12 Volt batteries with glow plugs
    • Block heater
    • Master disconnect switch and remote Jump start terminals
    • Pre-Cleaner

    MAST/FORKS/CARRIAGE

    • 15 ft Standard Mast
    • 22 ft Standard Mast
    • Power Positioning Mast and Forks
    • 48 in Pallet Forks, ITA Class 3 hook type
    • 48 in Pallet Forks, shaft type
    • 60 in Backrest

    HYDRAULICS

    • Front auxiliary hydraulics

    OPERATOR ENVIRONMENT

    • Load control
    • Deluxe suspension seat, with lumbar support and high adjustments

    OTHER

    • Slow moving vehicle emblem
    • Special paint
    • Lock-up covers
    • Light Package: Turn signals, Hazard warning, Combination flashers
    • Tool box
    • Sitewatch Telematics
    Products are subject to modifications without prior notice. Images throughout the spec sheet may refer to non-standard machines or non-available configurations depending on models.