Financing Available
Share this:


  • Operating Weight: 13,303 lb
  • Engine Power: 74 hp

Product Specification Sheet

    Need More Information?


    The largest in our lineup of Tier 4 Final F Series Compact Wheel Loaders is the stout 321F with Z-Bar linkage. The 321F delivers a full-height lifting capacity of more than 8,000 lbs. (3,640 kg) and bucket breakout force of up to 11,000 lbs while still maintaining a low overall height of only 8 ft. 10 in. (2,681 mm). Suspension upgrades, a standard skid steer coupler and improved auxiliary hydraulics help you tackle more tasks while an ergonomically designed cab keep operators comfortably in control.


    With a lower center of gravity and Z-bar linkage, the 321F has improved lifting power and breakout force. The suspension has been enhanced with a 20 degree oscillating rear axle that works independently of the cab for greater operator comfort and load control. An optional front and rear differential lock provides on-demand traction in loose or uneven terrain, and the high-speed option lets you travel at speeds up to 21.8 mph (35 km/h).

    The High Flow option comes with Creep Speed, which provides a maximum hydraulic flow at constant speed in the 0 to 3.4 mph (5.5km/h) range, ideal for running attachments like cold planers and snow blowers. The front electrical socket and Return Depressurized Drain complete the package.

    Fuel Efficiency
    The 321F features a maintenance-free Tier 4 emission solution. This means no regeneration downtime, no Diesel Particulate Filters (DPFs) to replace, no extreme exhaust temperatures, no after-treatment fluids to add. Just get in and go. It’s the best match for versatile, on-the-go machines of this size.

    Comfort and Visibility
    The F Series cab offers more space, greater all-around visibility, and an intuitive control interface to simplify operation. And with Creep Speed, Return-to-Dig and Ride Control™ options, it’s even easier to maximize productivity throughout the day. Air Seat, Bluetooth Radio and LED worklight options provide an enjoyable work environment for operators.

    With a tilt-up hood and friendlier access to daily checkpoints, the new F Series Compact Wheel Loaders were redesigned to simplify serviceability. Radiators, filters, hydraulics and the engine are all easily accessible so routine maintenance can be done in a matter of minutes.

    Additional information


    FPT F5HFL463 A

    Emissions Certification Solutions

    Tier 4 Final (CEGR, DOC)

    Gross Horsepower – hp (kW)

    74 (55)

    Net Horsepower – hp (kW)

    70 (52)

    Peak Torque @ 1400 RPM – lb·ft (N·m)

    233 (316)

    Full Turn Tipping Load ISO – lb (kg)

    8,192 (3 716)

    Operating Weight – lb (kg)

    13,303 (6 034)

    Bucket Breakout Force—lb (kN)

    10,076 (4 570)

    Auxiliary Hyd. Standard Flow/ High Flow – gpm (lpm)

    22.5 (85)/ 34.3 (130)

    Displacement/Cylinders – in³ (L)

    207.9 (3.4)/4

    Maximum Travel Speed Forward – mph (kph)

    20.6 (33)

    Ref. Bucket Capacity, heaped – yd3 (m3 )

    1.3 (1.0)

    Max. Material Density, ISO – lb/yd3 (kg/m3 )

    3,131 (1 858)

    Hinge Pin Height

    133.7 in (3 395 mm)

    Dump Height – Fully Raised, 45° Dump

    98.1 in (2 493 mm)

    Bucket Reach at Full Height

    39.5 in (1 003 mm)

    Height to Top of ROPS

    105.5 in (2 680 mm)

    Ground Clearance Under Shaft

    19.4 in (493 mm)

    Overall Width without Bucket

    73.2 in (1 860 mm)

    Overall Length – Bucket Level on Ground

    234.3 in (5 952 mm)


    87.6 in (2 225 mm)

    Optional Equipment


    • Creep speed 0 – 3.1 mph (5 kph)
    • TeleScop adjustable steering column on Deluxe Cab
    • Rotating beacon
    • Limited slip – front and rear axles
    • 100% lock – front and rear axles
    • Mechanical coupler
    • Horizontal pin coupler
    • Air conditioning
    • Radio ready antenna and speakers


    • Additional auxiliary flow:
      • Max. 22.5 gpm @ 2500 RPM @ 3,626 psi
      • (Max. 85 L/min @ 2500 RPM @ 25 000 kPa)
    • Optional High flow:
      • Max. 34.3 gpm @ 2500 RPM @ 2,901 psi
      • (Max. 130 L/min @ 2500 RPM @ 20 000 kPa)
    • Buckets – see performance data:
      • General purpose standard
      • General purpose light material
      • 4-IN-1®
    • STD forks
    • Tiltable Ride Control
    • Auto Ride Control
    • Return to dig


    • 405/70 R20 SPT9 L2 DUNL
    • 14.5-20MPT-04 MITAS
    • 365/80 R20 SPT L2(DL) – Standard
    • 365/80 R20 EM MITAS
    • 405/70 R20 EM MITAS


    • Tool box
    • Counterweight: 330 lb (150 kg), Mounts on rear chassis
    Products are subject to modifications without prior notice. Images throughout the spec sheet may refer to non-standard machines or non-available configurations depending on models.