Financing Available
Share this:

121F

  • Operating Weight: 11,272 lb
  • Engine Power: 58 hp

Product Specification Sheet

    Need More Information?

    Description

    The 121F is smaller in size but bigger in performance. A solid compact design offers greater weight distribution, enabling greater lifting capacity and maneuverability. The F Series cab provides operators greater visibility & comfort, improved attachment performance and versatility thanks to a standard skid steer coupler, and XT or Z-Bar linkage options. And the maintenance-free Tier 4 emission solution meets emissions regulations with no regeneration, no expensive DPF filters to replace, no extreme regeneration exhaust temperatures, and no after treatment fluids to add. Together, it all helps you get more done in less time.

    Features

    Productivity
    With a lower center of gravity and Z-bar linkage, the 121F has improved lifting power and breakout force. The suspension has been enhanced with a 20-degree oscillating rear axle that works independent of the cab for greater operator comfort and load control. An optional limited-slip differential provides on-demand traction in loose or uneven terrain. A new proportional loader control gives operators greater command of attachments, and with Connect Under Pressure (CUP) manifolds and a hydraulic coupler, switch out is quick and easy.

    Fuel Efficiency
    The 121F features a maintenance-free Tier 4 emission solution. This means no regeneration downtime, no Diesel Particulate Filters (DPFs) to replace, no extreme exhaust temperatures, no after-treatment fluids to add. Just get in and go. It’s the best match for versatile, on-the-go machines of this size.

    Comfort and Visibility
    The F Series cab offers more space, greater all-around visibility, and an intuitive control interface to simplify operation. And with new Creep Speed, Return-to-Dig and Ride Control™, air suspension seat, and Bluetooth radio options, it’s even easier to maximize productivity throughout the day. LED worklights helps keep production levels high and safe, even in low-light conditions.

    Serviceability
    With a tilt-up hood and friendlier access to daily checkpoints, the new F Series Compact Wheel Loaders were redesigned to simplify serviceability. Radiators, filters, hydraulics and the engine are all easily accessible so routine maintenance can be done in a matter of minutes.

    Additional information

    Engine

    FPT F5H FL463 B

    Emissions Certification Solutions

    Tier 4 Final (CEGR, DOC)

    Gross Horsepower – hp (kW)

    58 (43)

    Net Horsepower – hp (kW)

    55 (41)

    Peak Torque @ 1400 RPM – lb·ft (N·m)

    181 (245)

    Full Turn Tipping Load ISO – lb (kg)

    6,997 (3 174)

    Operating Weight – lb (kg)

    11,272 (5 113)

    Bucket Breakout Force—lb (kN)

    9,199 (4 172)

    Auxiliary Hyd. Standard Flow/ High Flow – gpm (lpm)

    22.5 (85)/-

    Displacement/Cylinders – in³ (L)

    207.9 (3.4)/4

    Maximum Travel Speed Forward – mph (kph)

    12.4 (20)

    Ref. Bucket Capacity, heaped – yd3 (m3 )

    0.92 (0.7)

    Max. Material Density, ISO – lb/yd3 (kg/m3 )

    3,821 (2 267)

    Hinge Pin Height

    123.5 in (3 136 mm)

    Dump Height – Fully Raised, 45° Dump

    90.6 in (2 302 mm)

    Bucket Reach at Full Height

    37.7 in (957 mm)

    Height to Top of ROPS

    96.8 in (2 458 mm)

    Ground Clearance Under Shaft

    17.5 in (444 mm)

    Overall Width without Bucket

    68.5 in (1 740 mm)

    Overall Length – Bucket Level on Ground

    218.5 in (5 549 mm)

    Wheelbase

    81.7 in (2 075 mm)

    Optional Equipment

    OPERATOR ENVIRONMENT

    • Creep speed 0 – 3.1 mph (5 kph)
    • TeleScop adjustable steering column on Deluxe Cab
    • Rotating beacon
    • Limited slip – front and rear axles
    • Mechanical coupler
    • Horizontal pin coupler
    • Air conditioning
    • Radio ready antenna and speakers

    LOADER

    • Additional auxiliary flow:
      • Max. 17.7 gpm @ 2500 RPM @ 3,626 psi
      • (Max. 67 L/min @ 2500 RPM @ 25 000 kPa)
    • Buckets – see performance data:
      • General purpose standard
      • General purpose light material
      • 4-IN-1®
    • STD forks
    • Tiltable Ride Control
    • Auto Ride Control
    • Return to dig

    TIRES

    • 12.5-18 1PRMPT-04TBL MITAS
    • 335/80 R18 EM MITAS
    • 335/80 R18 SPT9 L2 DUNL – Standard
    • 365/70 R18 EM MITAS
    • 365/70 R18 SPT9 L2 DUNL

    OTHER

    • Tool box
    • Counterweight: 330 lb (150 kg), Mounts on rear chassis
    Products are subject to modifications without prior notice. Images throughout the spec sheet may refer to non-standard machines or non-available configurations depending on models.